COATED BOARD MACHINE

-          Built by Gorostidi and DGI

-          Installed in the mill 1982 and many overhaulings 1990 – 96 – 2007

-          Speed maximum 250 – 300 m/min

-          Basis weigth from 220 to 540 gr/m2

-          Capacity maximum: 130 – 150 Tpd

-          Width on pope reel 2.250 mm to 2.300 mm

Machine:

(7) suction formers on stainless steel, with 3 aspiration zones built by DGI, 7 vertical screens Lamort SP600 with holes basket 2 – 3 mm

(2) suction presses with 1 felt, 1^st inferior felt and 2^nd superior felt, with frames and rolls

(2) presses with double felt built by Gorostidi

First dryer section, composed by: 16 dryer cylinders table with 2.500 and diameter 1.500 mm, press work 3,5 bar, with Madeleine rolls and close hood Brunnschweiler, rope guide ring. Included 2 dryers diameter 2.000 mm press work bar

Yankee cylinder diameter 3.200 mm, press work 3 bar with 1 press, with close hood

Second dryers section composed by 10 dryers cylinders table width 2.500 mm and diemater 1.500 mm, press work 5 bar with rope guide ring and rolls Madeleine

1 nip calender stack machine

Coating station, composed by:

Bachofen Meier barflex, table width 2.400 mm and diameter 400 mm, with Solartronics panels

Bachofen Meier barflex, table width 2.400 mm

Metering bar width 2.400 mm

Dryer tunnels

Last dryer section, composed by 5 dryer cylinders table width 2.500 mm and diameter 1.500 mm, press work 5 bar.

1 nip calender Küsters installed new in 2006

Pope reeler installed new in 2006 with automathic changed spools, maximum diameter of the reels 2.000 mm

3 Broke pulpers Grubbens on stainless steel

Vacuum pumps

Completely coating kitchen built by Cellier